草逼com,亚洲超爽a级毛片,免费真人做受视频在线,久久国产精品久久

客戶榮譽
kehury
技術文章
  • 咸陽紅外熱像儀 FLIR A310 ex
  • 布氏硬度（HB）原理
  • 用萬用表判斷電容器質量
  • 維氏硬度計選型注意事項
  • 紅外熱像儀使用注意事項
  • 電子天平開啟后完全無顯示的常見問題
  • 什么是三相電力分析儀及工作原理
  • 為什么示波器的波形更新率非常重要？
  • 如何選用稱重傳感器
  • 壓力表的常見問題及解決措施
    		•
    咸陽彩華精密機械有限公司
    咸陽誠和機械有限責任公司
    咸陽大秦?cái)?shù)控機床有限公司
    咸陽昊坤新型建材有限公司
    咸陽恒銘機械制造有限公司
    咸陽恒鑫供熱設備有限公司
    河北廊坊貝爾新型建材有限公司
    凱迪西北橡膠有限公司
    三原華航機械設備有限公司
    三原眾成機械設備有限公司
    陜西安耐傳動機械有限公司
    陜西浩合鑫機械科技有限公司
    陜西華特新材料股份有限公司
    陜西華興航空電器有限責任公司
    陜西家馨房地產開發有限公司
    陜西金立機械工程有限公司
    陜西凱思特醫療科技有限公司
    陜西柳工機械有限責任公司涇陽分公司
    陜西潤澤橡膠制品有限公司
    陜西賽恩斯壓縮機有限公司
    陜西三原順晟模具機械加工廠
    陜西升帆包裝有限公司
    陜西億福橡膠制品有限公司
    陜西永豐橡膠有限公司
    田西橡膠有限公司
    威思曼高壓電源有限公司
    武功縣綠健生物科技有限公司
    武功縣日朗自動化設備有限公司
    咸陽埃美柯閥門管道有限公司
    咸陽宏升機械制造有限公司
    咸陽吉順機電設備有限公司
    咸陽加鑫機械設備有限責任公司
    咸陽迦密橡塑有限公司
    咸陽嘉恒機械設備有限公司
    咸陽金博機電設備有限公司
    咸陽凱通通信工程公司
    咸陽科瑞迪機電設備有限公司
    咸陽科通機電設備有限公司
    咸陽藍光熱工程科技有限公司
    咸陽聯拓機電設備有限公司
    咸陽龍超機械制造有限公司
    咸陽秦遠石油機械制造有限公司
    咸陽三星電源設備制造有限責任公司
    咸陽圣亞機電設備有限公司
    咸陽市秦都區聚發塑料制品廠
    咸陽市秦都區士雷塑料制品廠
    咸陽市石頭河供水有限公司
    咸陽市優利爾泵閥開發制造有限公司
    咸陽泰德機械裝備有限公司
    咸陽陶瓷研究設計院
    咸陽天寶橡膠制品有限公司
    咸陽通成工程機械有限責任公司
    咸陽文博鉆探有限公司
    咸陽信達工貿有限公司
    咸陽憶科電子瓷業有限公司
    咸陽奕晟機械制造有限公司
    咸陽遠騰機電設備安裝工程有限公司
    咸陽運成機電設備有限公司
    咸陽眾力機械設備有限公司
    新陽光廢內胎橡皮圈廠
    興平市華盛機電設備廠
    興平市華盛精工機械有限責任公司
    旬邑全輝節能工貿有限公司
    當前位置：首頁 > 咸陽儀器儀表 > 咸陽環境檢測儀器 > 咸陽紅外熱像儀
    紅外熱像儀
    型　號：FLIR A310 ex
    品　牌：美國FLIR
    技術指標：范圍：–20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    咸陽紅外熱像儀-FLIR A310 ex-美國FLIR

    Fully compliant with ATEX regulations

    Use the power of thermal imaging in hazardous locations.

    Explosive atmospheres need to be protected from ignition sources by selecting equipment and protective systems which meet the requirements of the ATEX Product Regulations or similar regulations.

    FLIR A310 ex is an ATEX compliant solution, with a thermal imaging camera mounted in an enclosure, making it possible to monitor critical and other valuable assets also in explosive atmospheres. Process monitoring, quality control and fire detection in potentially explosive locations are typical applications for the A310 ex.



    FLIR A310 ex Thermal Camera Features

    A310ex schema
    1. Heater
    2. Sensors for temperature, air humidity, voltage & pressure
    3. Power supply: 24V DC
    4. 2 SFP ports for fiber optic, 100 Base-FX or copper ethernet
    5. ATEX compliant housing

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.

    Flame-Proof Enclosure “d”

    Prevents any explosion transmission from the inside of the enclosure to the outside.

    For use in harsh environments: IP67

    The FLIR A310 ex is IP67 rated. Ideal to install in dusty environments.

    Integrated controller

    The integrated controller features several digital I/O channels and sensors for temperature, humidity and pressure. Among other functions, the I/O channels enable the user to switch on/off the camera and the heater via remote control. The access is accomplished through an integrated web interface or Modbus TCP/IP.

    Flexible integration

    The integrated controller is equipped with 2 fiber optic and 2 Ethernet parts. This enables a flexible network integration in star or ring topologies.

    Heater

    FLIR A310 ex comes with a heater which effectively prevents fogging and freezing of the protection window.

    Plug and play installation

    FLIR A310 ex is lightweight and the entire system is delivered ready for use.

    Verification Certificate ZELM 12 ATEX 0485 X

    The FLIR A310 ex is ATEX certified. It can be installed in classification zones 1, 2, 21, 22.

    The certification comprises the whole system which includes the enclosure as well as all components inside, such as the thermal imaging camera, heater and integrated controller.

    Learn more about the FLIR A310, the thermal imaging camera inside FLIR A310 ex.



    FLIR A310 ex Technical Specifications

    General Data
    Ambient temperature range for operation –20°C to +40°C (-4°F to 104°F)
    Protection class IP67
    Weight 6.7 kg (without camera and lens)
    Empty volume 5.06 l
    External dimensions (without sun shield) D = 170 mm, L = 408 mm
    Housing material / Surface Nickel-plated aluminium / Powder coated
    Protection window Germanium, double-sided AR Coated, externally with additional hard-carbon layer
    Maximum power of the additional heater 16 W
    Operating voltage 24 V DC
    Maximum electric connection power 60 W
    Power cable / Power cable configuration Helukabel 37264 / Pigtail
    Length of power cable 4 m (13 ft.)
    Integrated controller 4-port switch with 2 × fiber-optic LC 100Base-FX or 2 × RJ45(10/100) up-links, ring-topology support for reduced cabling effort, 2 × internal temperature sensors, air humidity and pressure sensor, digital output module controllable via Modbus TCP/IP or web interface to enable turning the heater on/off
    Ethernet medium Multi-mode breakout fiber AT-V(ZN)Y(ZN)Y 4G50/125 OM2
    Length of Ethernet cable 4 m (13 ft.)
    Ethernet, configuration Pigtail with FC-connector
    Explosion protection-specific data
    For use in EX zone 1, 2, 21, and 22
    Ignition protection category Flame-proof enclosure “d”
    Maximum surface temperature (according to temperature class T6) Maximum 85°C
    ATEX certification (version -AXC) EX-Protection Gas: II 2G Ex d IIC T6 Gb, EX-Protection Dust: II 2D Ex tb IIC T85° Db
    Verification certificate ZELM 12 ATEX 0485 X
    Imaging and optical data
    IR resolution 320 × 240 pixels
    Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
    Field of view (FOV) / Focal length 25° × 18.8° with 18 mm (0.7 in.) lens or 45° × 33.8° with 9.66 mm (0.38 in.) lens
    Minimum focus distance 0.4 m (1.31 ft.)
    Spatial resolution (IFOV) 1.36 mrad with 25° lens or 2.59 mrad with 45° lens
    Lens identification Automatic
    F-number 1.3
    Image frequency 30 Hz
    Focus Automatic or manual (built in motor)
    Zoom 1–8× continuous, digital, interpolating zooming on images
    Detector data
    Detector type Focal Plane Array (FPA), uncooled microbolometer
    Spectral range 7.5–13 μm
    Detector pitch 25 μm
    Detector time constant Typical 12 ms
    Measurement
    Object temperature range –20 to +120°C (–4 to +248°F) 0 to +350°C (+32 to +662°F)
    Accuracy ±2°C (±3.6°F) or ±2% of reading
    Measurement analysis
    Spotmeter 10
    Area 10 boxes with max./min./average/position
    Isotherm 1 with above/below/interval
    Measurement option Measurement Mask Filter Schedule response: File sending (ftp), email (SMTP)
    Difference temperature Delta temperature between measurement functions or reference temperature
    Reference temperature Manually set or captured from any measurement function
    Atmospheric transmission correction Automatic, based on inputs for distance, atmospheric temperature and relative humidity
    Optics transmission correction Automatic, based on signals from internal sensors
    Emissivity correction Variable from 0.01 to 1.0
    Reflected apparent temperature correction Automatic, based on input of reflected temperature
    External optics/windows correction Automatic, based on input of optics/window transmission and temperature
    Measurement corrections Global and individual object parameters
    Alarm
    Alarm functions 6 automatic alarms on any selected measurement function, Digital In, Camera temperature, timer
    Alarm output Digital Out, log, store image, file sending (ftp), email (SMTP), notification
    Set-up
    Color palettes Color palettes (BW, BW inv, Iron, Rain)
    Set-up commands Date/time, Temperature°C/°F
    Storage of images
    Storage media Built-in memory for image storage
    File formats Standard JPEG, 16-bit measurement data included
    Ethernet
    Ethernet Control, result and image
    Ethernet, type / standard 100 Mbps / IEEE 802.3
    Ethernet, configuration Pigtail with FC-connector (fiber)
    Ethernet, communication TCP/IP socket-based FLIR proprietary
    Ethernet, video streaming MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5
    Ethernet, image streaming 16-bit 320 × 240 pixels @ 7-8 Hz - Radiometric
    Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnP
    Shipping information
    Infrared camera with lens, in explosion-proof housing, cardboard box, Printed documentation, User documentation CD-ROM, Utility CD-ROM


    ，建筑專用 紅外熱像儀，
    同類產品
    地址：青島市嶗山區海爾路29號溫哥華花園5-1-401
    電話：0532-86069117　83812497　83821263
    傳真：0532-88786387 網址：www.sim-placement.com
    青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號