甘肅嘉峪關宏豐實業有限責任公司
甘肅嘉峪關宏鑫礦業有限責任公司 甘肅省嘉峪關市春源糖酒副食超市 甘肅省嘉峪關市沃土果蔬制品有限公司 甘肅省嘉峪關市中昌食品有限公司 甘肅西域生物科技制品有限公司 嘉峪關愛家有味副食品店 嘉峪關寶泰再生資源回收有限責任公司 嘉峪關東方紅安機電有限公司 嘉峪關鳳翔新型節能材料有限責任公司 嘉峪關宏電鐵合金有限責任公司 嘉峪關宏豐實業有限責任公司 嘉峪關宏豐實業有限責任公司紫軒酒業 嘉峪關開心樂冷凍食品有限公司 嘉峪關聯宇建材有限公司 嘉峪關聯重機械設備有限公司 嘉峪關榮盛不銹鋼制品有限公司 嘉峪關瑞斯達機電設備有限公司 嘉峪關三力天源選礦設備有限責任公司 嘉峪關盛源工程機械設備安裝有限公司 嘉峪關市乘勝商貿有限責任公司 嘉峪關市迪賽傳動設備有限責任公司 嘉峪關市飛洪商貿有限責任公司 嘉峪關市亨通礦業經貿有限責任公司 嘉峪關市恒貿消防器材有限公司 嘉峪關市匯聚鑫五金制品有限責任公司 嘉峪關市惠譽德商貿有限責任公司 嘉峪關市康華礦業投資服務公司 嘉峪關市離合器加工廠 嘉峪關市茂源建筑安裝有限責任公司 嘉峪關市日松工程機械有限公司 嘉峪關市盛勤物資有限責任公司 嘉峪關市新城鎮農業技術綜合服務站 嘉峪關市鑫火鑄造廠 嘉峪關市興業建筑工程有限責任公司 嘉峪關市陽光日泰地暖安裝工程有限公司 嘉峪關市遠盛達商貿有限公司 嘉峪關市中昌食品有限責任公司 嘉峪關泰鼎鐵路物資有限公司（西北鐵路物資） 嘉峪關泰鑫商貿有限責任公司 嘉峪關新達電梯工程有限公司 嘉峪關興海食用菌農民專業合作社 嘉峪關易信科商貿有限責任公司 嘉峪關益河工程機械有限責任公司 嘉峪關源發工程機械有限公司 嘉峪關云尚貝爾航空食品有限公司 嘉峪關正民農業機械服務農民專業合作社 酒泉力信睿合商貿有限責任公司 |
A powerful, complete hydraulic pressure calibration system to cover a wide workload Fluke Calibration improved the hydraulic pressure calibration process with the introduction of E-DWT-H electronic deadweight tester. E-DWT-H is an electronic calibrator designed to deliver traditional hydraulic deadweight tester performance with digital measurement features and convenience. Some improvements offered by E-DWT-H include: · No weights to load and unload, transport or send out for calibration · Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature · No piston-cylinder changes · No significant sensitivity to level or vibration · Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration · Operates in any unit of measure, switching easily from one unit to the next The E-DWT-H is at home in metrology and calibration labs, on the production floor or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality manual pressure hardware. E-DWT is named “electronic deadweight tester” because it is intended as a lightweight and easy to use, modern alternative to conventional piston-cylinder and weight based deadweight testers. The E-DWT’s electronic reference pressure monitor is a special version of RPM4, designated RPM4-E-DWT. RPM4-E-DWT can be configured with one or two high precision quartz reference pressure transducers (Q-RPTs) with ranges from 7 MPa (1 000 psi) to 200 MPa (30 000 psi). The RPM4-E-DWT is controlled locally by the operator using its front panel display, keypad and optional foot pedal or remotely by a computer using ASCII character command strings over its RS-232 interface. RPM4-E-DWT uses an AutoRange feature to automatically select the most appropriate Q-RPT and to optimize the E-DWT-H setup to cover the desired range of operation. When two Q-RPTs are included, a half-turn valve isolates and protects the Lo Q-RPT from high pressure when the Hi Q-RPT is in use. Visual and audible indicators assist the operator in setting the shut off valve correctly. The E-DWT-H includes the hardware necessary to fill and prime the system under test and generate and precisely adjust pressure up to 200 MPa (30 000 psi). The E-DWT-H can be powered with an optional battery/charger pack for use in locations where AC power is not readily available. High performance calibration made simple Fluke Calibration electronic deadweight tester kits feature E-DWT-H configurations combined with the accessories needed for a complete calibration system. Model 6531 options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10 % to 100 % of device full scale. Model 6532 options feature an additional Q-RPT to maximize workload coverage, with percent of reading performance from 1 % to 100 % of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. 6531 and 6532 kits provide all you need to perform high level hydraulic pressure calibration right out of the box. · Pressure ranges available to 200 MPa (30,000 psi) · ± 0.02 % of reading total one-year accuracy, 0.025 % for two years · Low torque variable volume allows for pressure generation and control up to 200 MPa (30,000 psi) with minimal physical effort · Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation · Unique test port design eliminates the need for PTFE tape or wrenches. Adapters included for 1/8 in, 1/4 in, 3/8 in and 1/2 in NPT, 1/8 in, 1/4 in, 3/8 in and 1/2 in BSP, M20 x 1.5 and M14 x 1.5 · Compatible with a wide range of liquids, including water. Vacuum fill kit included to fill the E-DWT with any compatible test medium · AutoTest™, AutoRange, ready/not ready indicator, onboard data capture and storage, overpressure alarm, RS-232 remote interface and other advanced features to simplify testing, improve safety and prevent calibration errors and damage to equipment · Optional foot switch accessory allows hands-free data collection when running AutoTests · Rechargeable battery pack and transport case options for field operation
·
·
1. Combined linearity, hysteresis, and
repeatability. Precision does not include stability or calibration reference
uncertainty.
通用配件:
，，
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
       |
| 地址：青島市嶗山區海爾路29號溫哥華花園5-1-401 電話：0532-86069117 83812497 83821263 傳真：0532-88786387 網址：www.sim-placement.com 青島東方嘉儀電子科技有限公司 版權所有 備案號: 魯ICP備08106748號 
|
 |